Owners Manual
Table Of Contents
- The ART TPS II(
- IMPORTANT SAFETY INSTRUCTION – READ FIRST
- The ART TPS II(
- Tube Preamp System
- IMPORTANT SAFETY INSTRUCTION – READ FIRST 2
- INTRODUCTION 4
- TPS II( FEATURES: 5
- INSTALLATION 6
- CONTROLS & INDICATORS 7
- CONNECTIONS 12
- OPERATION 15
- WARRANTY INFORMATION 17
- Limited Warranty 17
- TPS II( SPECIFICATIONS 19
- INTRODUCTION
- TPS II( FEATURES:
- INSTALLATION
- CONTROLS & INDICATORS
- CONNECTIONS
- OPERATION
- WARRANTY INFORMATION
- Limited Warranty
- TPS II( SPECIFICATIONS
- 14 -
If you experience a grounding hum when using both output connectors
(one to a console, one to an instrument amp) simultaneously, a ground
loop may be the problem. To remedy this problem, disconnect the
ground wire (pin 1) from the XLR cable plugged into the preamp’s
output. This interrupts the ground path, and therefore breaks the loop.
TPS II™ signal Flow Diagram
The above diagram outlines the signal flow of the TPS II™. It provides
for a handy optical reference for what is occurring to the signal, and the
various features of the TPS II™, and their location and interaction with
the signal.