Specs

Offering a superb level of sound quality, the SLA-1's clean and powerful circuitry combined
with a straightforward user interface quickly and easily delivers the power you need for
professional and project studio sound amplification.
The design of the SLA-1 delivers professional recording studio results at a fraction of the cost of
comparable equipment. The SLA-1 may be used in a wide variety of project and professional
studio and environments. Self-contained in an all-steel enclosure, the unit is designed for
many years of use. The SLA-1 is a studio linear power amp that delivers clean, clear power,
and will help reproduce your mixes with near pinpoint accuracy.
The SLA-1 has a long list of impressive features, and is an incredible value. The SLA-1 is perfect
for pro, project and home studios, and is a perfect compliment to the ART SLM-1 Studio Linear
Monitors. The combination of these two units allow project studios to quickly and easily
upgrade their existing set-up for monitoring recorded material.
Studio Linear Amplifier
SLA-1
SLA-1SLA-1
FEATURES:
TOROIDAL
TRANSFORMER
100 WATTS/
CHANNEL
@ 8 OHMS
260 WATTS/
BRIDGED
MONO @
8 OHMS
10 HZ to 40 KHZ
WITHIN 1dB
XLR & ¼"
INPUTS
GROUND LIFT
SWITCH
SILENT, THERMAL
DEPENDENT
COOLING SYSTEM
MULTI-WAY
BINDING POST
OUTPUTS
LOW PROFILE
1U RACK
MOUNTABLE
DESIGN
EXTREMELY LOW
NOISE, DISCRETE
LINEAR DESIGN
ALL STEEL
CHASSIS
PERFECT FOR
PROFESSIONAL
AND PROJECT
STUDIOS
APPLICATIONS:
Features and specifications subject to change without prior notice.
Copyright 2001 Applied Research and Technology.
APPLIED RESEARCH AND TECHNOLOGY, 215 TREMONT STREET, ROCHESTER, NY 14608 USA
Voice: 716/436.2720, Fax: [phone], http://www.artproaudio.com
Dimensions 1.75”H x 19.0”W x 9.5”D
Weight 13.2 lbs., 6.0kg.
Input Connections XLR (balanced), 1/4” TRS
(balanced/unbalanced)
Output Connections Multi-Way Binding Posts
Input Impedance XLR, 1/4” 44k ohms (balanced),
22k ohms (unbalanced)
Input Sensitivity 1V for Full Power Output into 8 ohms
Stereo Output Power, 8 ohms 100 watts RMS per Channel
Stereo Output Power, 4 ohms 130 watts RMS per Channel
Bridged Output Power, 8 ohms 260 watts RMS mono
CMRR >60dB (typical @1kHz)
Frequency Response 10Hz to 40kHz, +/- .5dB
Hum and Noise >100dB below clipping
Total Harmonic Distortion (THD) <0.05% (typical)
Transformer Type Toroidal
Power Requirements USA - 120vac 60 Hz 600 watts (max).
Export units configured for country of
destination.
Project, Home and Commercial Recording Studios, Broadcast/Radio/TV, Live Sound Systems/PA,
Permanent/Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems
SPECIFICATIONS: