Specifications

56
How to Read the Preset Description
40 WET BODY
CHORUS → Title Line
REV-1 CHO
TRM → Digital Effects Line
EQL
→ Analog Effects Line
2
controllers: 11 4 → MIDI Controller
Line
The first line of the preset description
tells you the name and location of each
Factory Preset on the first line. On the
next line, which digital effects present
in the preset are shown. Analog effects
used for the preset are listed on the
third line. How many and which MIDI
controllers are listed on the last line.
Table of Effect Abbreviations:
FIrst is the abbreviation found in the
preset list. Next is the actual effect
algorithm name. In brackets, how the
algorithm name is displayed in the LCD.
For a description of the algorithms and
parameters, refer to the section
"Description of Algorithms".
AES = ACOUSTIC ENVIRONMENT SIMULATOR [ACU-
ENV-SIM], [AES]
CHO = CHORUS [CHORUS], [CHO]
D-PTR = DUAL PITCH TRANSPOSER [DUAL PTr],
[2PT]
EQL = EQUALIZER (SEVEN BAND EQUALIZER)
[EQUALIZER], [EQL]
FLA = FLANGER [FLANGER], [FLA]
GAT-1 = GATED REVERB-1 [GATE-VERB-1],
[GAT]
GAT-2 = GATED REVERB-2 [GATE-VERB-2],
[GAT]
GAT-3 = GATED REVERB-3 [GATE-VERB-3],
[GAT]
LPF = LOW PASS FILTER [LOW-PASS], [LPF]
MPN = MIDI-PAN [MPN]
PAN = PANNER [PANNER], [PAN]
PSR = PHASER [PHASER], [PSR]
PTR = PITCH TRANSPOSER [PITCH-TRANS],
[PTr]
R-DDL-S = REGEN-DDL-SHORT [REGEN-DDL-S],
[DDL]
R-DDL-L = REGEN-DDL-LONG [REGEN-DDL-L],
[DDL]
REV-1 = REVERB-1 [REVERB-1], [REV]
REV-2 = REVERB-2 [REVERB-2], [REV]
REV-3 = REVERB-3 [REVERB-3], [REV]
S-DDL-S = STEREO-DDL-SHORT [STREO-DDL-S],
[DDL]
S-DDL-L = STEREO-DDL-LONG [STREO-DDL-L],
[DDL]
SMP-S = SAMPLER-SHORT [SAMPLER-S], [SMP]
SMP-L = SAMPLER-LONG [SAMPLER-L], SMP
SMP+PTR = SAMPLER+PITCH TRANSPOSER
[SAMPLER+PTR], [SPT]
T-DDL-S = TAPPED-DDL-SHORT [TAP'D-DDL-S],
[DDL]
T-DDL-L = TAPPED-DDL-LONG [TAP'D-DDL-L],
[DDL]
TNR = GUITAR TUNER [TUNER], [TNR]
TRM = TREMOLO [TREMOLO], [TRM]
WARRANTY & SERVICE INFORMATION
LIMITED WARRANTY
Warranty service for this unit will be
provided by Applied Research &
Technology, Inc. in accordance with the
following warrant statement.
Applied Research & Technology, Inc.
warrants to the original purchaser that
this product and the components
thereof, will be free from defects in
workmanship and materials for a period
of one year from the date of purchase.
Applied Research & Technology, Inc.
(ART) will, without charge, repair or
replace, at its option, defective
product or component parts upon prepaid
delivery to the factory service
department or authorized service
center, accompanied by proof of
purchase date in the form of a valid
sales receipt.
EXCLUSIONS: This warranty does not
apply in the event of misuse or abuse
of the product or as a result of
unauthorized alterations or repairs.
This warranty is void if the serial
number is altered, defaced, or removed.
ART reserves the right to make changes
in design or make additions to or
improvements upon this product without
any obligation to install the same on
products previously manufactured.
ART shall not be liable for any
consequential damages, including
without limitation damages resulting
from loss of use. Some states do not
allow limitation of incidental or
consequential damages, so the above
limitation or exclusion may not apply
to you. This warranty gives you
specific rights and you may also have
other rights which vary from state to
state.
For units purchased outside The United
States, service will be provided by an
authorized distributor of Applied
Research & Technology, Inc.
SERVICE
The following information is provided
for the unlikely event your unit
requires service.
1) Be sure the unit is the cause of the
problem. Check to make sure the unit
has power supplied, all cables are
connected correctly and the cables
themselves are in working condition.
2) If you find the unit to be at fault,
write down a description of the problem
including how and when the problem
occurs.
3) Call the factory for a Return
Authorization (RA) number.
4) Pack the unit in it's original
carton or a reasonable substitute. The
packing box is not recommended for a
shipping carton. Put the packaged unit
in another box for shipping. Print the
RA number clearly under the address.
5) Include with your unit: a return
shipping address (We cannot ship to a
P.O. Box), a copy of your purchase
receipt, a daytime phone number, and
the description of the problem.
6) Ship the unit to:
APPLIED RESEARCH & TECHNOLOGY, INC.
215 TREMONT STREET
ROCHESTER, NY 14608
ATTN: REPAIR DEPARTMENT
RA # ___________________
7) Contact our customer service
department at [phone] for your
Return Authorization number or
questions regarding repairs. Customer
Service hours are 9:00 AM to 4:00 PM
Eastern Time, Monday through Friday.