Specifications

43
-Press the EDIT button.
-Press the Preset button and use the Encoder to select preset 120. -Press the
Store button.
*You've just copied #79 to location 120.
-Press the ADD EFFECT and turn the Encoder until you see [ADD:MIDI CONTRL?].
-Press the ENTER button.
*You have just added a MIDI controller to the preset.
-Press the Param button four times.
-Press the Value button.
-Use the Encoder to select [CHO:LEVEL = 100%]
-Press the Value button again, DON'T CHANGE THIS VALUE.
-Press the Value button again.
-Use the Encoder to change the value to 50%.
-Press the Value button one more time!!!!
-DON"T CHANGE THE SETTING
-Press the STORE button.
*Press the EDIT Mode button to exit Edit Mode.
You now have edited a Factory Preset 79 for
PM
control of the chorus width. When
you use the left pedal on the X-15 your chorus level will change from 50% to
100%. You may edit any existing preset to be controlled by
PM
. Remember to UNLOCK
the preset to STORE your changes and then re-lock the presets.
EXAMPLE 6
Controlling the Overall Level of an ALPHA 2.0 Preset.
To control the level on each preset, you must add the two MIDI controllers set up
like this TO EACH PRESET and control the Dry and Efx parameters of the Mix with
one foot controller.
We will use Factory Preset 79 again for this example. If you have completed
Example 5, adding PM to a Factory Preset, copy Factory Preset 79 into location
121.
-Recall preset 79.
-Press the EDIT button.
-Press the Preset button and use the Encoder to select preset 121.
-Press the Store button.
*You've just copied #79 to location 121.
-Press the ADD EFFECT button and them turn the Encoder until you see [ADD:MIDI
CONTRL?].
-Press the ENTER button.
-Add another MIDI controller
-Press the Param button eight times.
-Press the Value button twice.
-Use the Encoder to select [MC 11:EXP. CTRL.]
-Press the Value button again, DON'T CHANGE THIS VALUE.
-Press the Value button again, DON'T CHANGE THIS VALUE EITHER.
-Press the Value button.
-Use the Encoder to select [MIX:EFX = 75%]
-Press the Value button once. .
-Use the Encoder to select [MC 11:EXP. CTRL.]
-Press the Value button again, DON'T CHANGE THIS VALUE.
-Press the Value button again, DON'T CHANGE THE VALUE.
-Press the Value button.
-Press the STORE button.