Specifications

38
Other Means of Bypassing the ALPHA 2.0
Another means of bypass is attained by programming the either REMOTE jack on the
rear panel for the bypass function described under the UTILITY button and
referred to as REMOTE SWITCH. Refer to the REMOTE JACK section for additional
information. Bypassing the unit via MIDI may be done by easily. Since the
MULTIVERB ALPHA 2.0 has the capability of MIDI BYPASS, all you need to send is an
on/off control message. The MULTIVERB ALPHA 2.0 bypass default setting is MIDI
Controller # 84.
X-15
If you are using your MULTIVERB ALPHA 2.0 with the ART X-15 ULTRAFOOT, refer to
the X-15 manual for any detailed information you may need.
Contact Information
Applied Research & Technology, Inc. (ART)
215 Tremont Street
Rochester, New York 14608
USA
[phone]
[phone] (FAX)
Telex: 4949793 ARTROC
Customer Service
You may contact ART's Customer Service Department between the hours of 9:00 AM
and 4:00 PM Eastern Time Monday through Friday.
The Customer Service Department will answer technical questions about ART
products and provide information concerning service (in the unlikely event you
need it).