Specifications

18
MIDI Event data Monitoring Mode
When you select this Mode, MIDI information is displayed in either easy to read
and understand or technical terms. The LCD displays certain MIDI events as they
occur, regardless of which MIDI channel is selected. Information displayed is the
MIDI event itself, its attributes with a choice of display formats (in either
decimal or hexadecimal base 16).
For detailed information, please refer to the MIDI DATA MONITOR section.
PRESS ENTER TO:
SEND A PRESET
Dump a single preset via MIDI to another MULTIVERB ALPHA 2.0 or MIDI storage
device.
Sending a Preset
Transferring a
single preset
to another MULTIVERB ALPHA 2.0 or a suitable MIDI
device is accomplished by selecting the SEND A PRESET value and pressing the
Enter button.
SEND ENTIRE MIDI PROGRAM TABLE
Dump entire MPT via MIDI to another MULTIVERB ALPHA 2.0 or MIDI storage device.
Sending MPT Information
Transferring the
entire MPT
to another MULTIVERB ALPHA 2.0 or a suitable MIDI
device is accomplished by selecting the SEND ENTIRE MPT value and pressing the
Enter button.
SEND ALL PRESETS
Dump all presets via MIDI to another MULTIVERB ALPHA 2.0 or MIDI storage device.
Sending all Preset Information
Transferring
all presets
to another MULTIVERB ALPHA 2.0 or a suitable MIDI
device is accomplished by selecting the SEND ALL PRESETS value and pressing the
Enter button.
IMPORTANT NOTE For:
RECEIVING Preset and MPT Information
To dump MIDI data into the MULTIVERB ALPHA 2.0 from either another MULTIVERB
ALPHA 2.0 or an external MIDI device you must make sure that the MIDI channels
match or OMNI mode is used.
The MULTIVERB ALPHA 2.0 will accept MIDI data at all
times regardless of what operating mode it is in.
PERFORMANCE MIDI
[
PM
]
Performance Midi allows the MULTIVERB ALPHA 2.0 to have up to eight of its
parameters per preset controlled simultaneously via MIDI. Selection of the
parameter to be controlled, the actual MIDI controller, the Scale of the
adjustment ratio and the starting Center Point of the Scale may be programmed
from the front panel.
When you are in Preset or Edit Mode, the LCD will inform you of either
Performance MIDI or FX ON/OFF information being received and what is being
changed.
There is also a means to monitor MIDI information being sent to the MULTIVERB
ALPHA 2.0. While you are in the PM Mode you can select the MIDI Monitor utility