Specifications

Preset 1-115 Locked/Unlocked

Protects the first 115 presets from being overwritten.

The factory presets may be unlocked for editing. When you set the value for

Unlocked, all factory presets are unlocked and ready to edit. To relock the

presets, select the Locked value when you are done editing. At first you may not

want to overwrite the factory presets, so increment up to a user preset and store

the new preset.

UNLOCKING THE FACTORY PRESETS

-Make sure you are in the EDIT Mode. (Press EDIT button if not)

-Press the UTILITY button.

-Press the Param button.

-Use the Encoder to select the screen displaying [PRESET1...115 = LOCKED].

-Change the Value to UNLOCKED.

All presets are now unlocked.

If you wish to store new information in the

Factory Presets, press the STORE button.

NOTE:Remember, when you unlock a preset, ALL presets are unlocked. To prevent

overwriting presets, re-lock the presets following the directions to unlock a

preset, only selecting the "LOCKED" value.

MIDI

You may gain access to all MIDI parameters and their values by pressing this

button. Shown here are the variable MIDI parameters and their default value

settings.

Once you are in MIDI Mode you may change values by first selecting the parameter

and then changing the value. To do this first press the PARAM button and select

the parameter you wish to change with the Encoder. Next press the VALUE button

and use the Encoder to select a new value. You do not need to press the STORE

button to save the changes with one exception, it is done automatically when you

exit MIDI Mode. You need to press the Store button if you edit the On/Off status

of an effect. To exit MIDI Mode, press the MIDI button to return to Edit Mode or

the Edit button.

PROGRAMMING HINT:

Press the Value button to change and view the parameters then

use the Encoder to set the value. This way you don't have to switch between the

Param and Value buttons to edit values.

MIDI Enable

PM= ON, OFF [ON]

PROG= ON, OFF [ON]

Allows you to turn on or off

erformance

IDI and the Program change function

independently. If you wish to use

and not change presets, set PROG to = OFF.

MIDI Channel

OFF-16 [1]

Sets MIDI send and receive channel number.