User Guide

Cardioid Condenser
Microphone
Designed in the USA • Made in China
Visit us at: www.artproaudio.com or email us at: [e-mail]
behind the microphone windscreen will illuminate when phantom
power is present, and the microphone is operational.
The microphone’s chassis is precision-tooled zinc/aluminum
alloy with a dent resistant stainless-steel wire-mesh windscreen.
The included heavy-duty shock-mount suspension virtually
eliminates vibration and handling noise, while at the same time
safely securing the microphone in any position needed during
the recording process.
Specifications:
T
ype: Wide Diaphragm Side Address Condenser Microphone
Capsule:
32mm Gold Sputtered Low Mass Diaphragm
Polar Pattern: Cardioid
Frequency Response: 20Hz to 20,000Hz
MAX SPL: 135dB / 147dB (0, -12dB)
Low Frequency Roll-Off: 12dB / octave @ 100Hz & 200Hz
Pre-attenuation Pad Switches: -6dB, -12dB
S/N Ratio: 78dB
Sensitivity: -35dB (+/-2dB)
Impedance: <200 ohms
Recommended Load Impedance: 1000 ohms
Power Requirement: 48v Phantom Power
Dimensions: 37mm x 175mm / 1.5 inches x 6.9 inches
Weight: 16oz / 469g