Owners Manual

INSTALLATION and OPERATION:
Connect your line level signal to INPUT 1 - 1/4" TRS
phone jacks or XLR Input connector. Connect either 1/4"
jack or XLR of OUTPUT 1 to an instrument or mic input.
For dual operation, connect INPUT 2 and OUTPUT 2 in
a similar manner and set the OUTPUT 2 SOURCE
switch to Input 2.If you want to split INPUT 1 into two
outputs, set the OUTPUT 2 SOURCE switch to Input 1.
Use the OUTPUT 2 PHASE switch to correct phase
error problems elsewhere in the audio system.
Set the Output Level knobs for best signal strength and
clarity.