Specifications

- 9 -
2
UNLOADED PRESET INDICATOR
When you turn the Preset Encoder to view presets, the DMV-PRO’s sound won’t
change until you press the Preset Encoder to load the preset. The Unloaded
Preset Indicator is a reminder that you are viewing an unloaded preset.
3
PRESET DISPLAY
The Preset Display shows 3 alphanumeric characters that correspond to the
current preset number, whether it’s presently loaded or not. When the Preset
Display is flashing a preset number, it is because you have entered Store mode
and pressing the Store button will overwrite the current preset number’s contents.
SPECIAL FUNCTIONS:
Restoring Presets to Original Factory Settings
The DMV-PRO can overwrite all stored presets with its original factory settings. This process is called a
Factory Reset.
WARNING: A Factory Reset erases all customized presets.
If you have saved some favorite programs, either scroll through their parameters and write them down, or use
the MIDI Dump feature to off-load your presets to a MIDI storage device before implementing a factory reset.
(See page 11 for information on the DMV-PRO’s MIDI Dump.)
To perform a Factory Reset, follow these steps:
1)
Press the MIDI/Util button.
2)
Turn the Preset Encoder until [ ]
appears in LCD (B). 3) Press the Edit (B) button and notice that LCD (B) is now flashing [
]. 4) Press Edit (B) again to confirm that you really want to perform a Factory Reset. If
Edit is not pressed again within 10 seconds, or if any other button except for Edit is pressed, the DMV-PRO
will exit from Factory Reset mode with your former presets still intact.