User Manual

5
INSTALLATION and OPERATION
BLUETOOTH
Bluetooth Section
The BTDI is capable of receiving streaming audio over
Bluetooth from devices such as smartphones and
laptops. Pairing your device with the BTDI is simple and
gives you the freedom to play your music wirelessly.
1. Pairing / Bluetooth Pair Button. When the Pair
Button is pressed for 4sec, the Bluetooth audio
connection is available for pairing. After pressing the
Pair Button, go to the Bluetooth menu on your
streaming audio device. You will see a device named
“BT-DI_vx”. Select this device to initiate pairing. Once
you see the “BT-DI_vx” device connected, you will be
able to stream audio to the BT-DI.
2. Disconnecting the paired device requires the pairing
button to be pressed twice in one sequence. The blue
LED will not light once the paired unit has been
disconnected. Then the LED will resume blinking
slowly to be paired again.
3. Bluetooth Status Indicator. The blue status indicator
alerts the user to the current status of the Bluetooth
connection. A fast-blinking light indicates an available,
unpaired connection. Constant steady Blue light