Specifications

12
www.blitzrcworks.com
Indication that the receiver is working if it is tested
between 4.8V to 6V
Current drain rate: < 40mA
Weight: 12g
Dimension: 44mm x 23mm x 15mm
Number of channels: 6
Range in height: > 350m
Adjacent channel rejection: > -85dBm + 16kHz
RECEIVER INFORMATION
Function
1.
2.
3.
4.
5.
6.
Landing Gear Retracts/ Bomb doors
Specifications
Rudder
Throttle
Elevator
Aileron
Connections for helicopters
Connections for airplanes
Pitch
B.
Battery/Bind
1.
2.
3.
4.
5.
6.
Rudder
Throttle
Elevator
Aileron
Pitch
B.
Battery/Bind
Gyro gain
Signal
+
-
Signal
+
-
The receiver operates on an input of DC power given from plugging in the circuit and servo wires. The input
voltage should be between 4.8V and 6V. The electric current is 0.25A of the receiver plus the current of the
servos.
Three common methods of supplying power to the receiver:
1.A separate battery pack for the receiver.
2.ESC (Electronic Speed Controller) with BEC (Battery Eliminate Circuit).
3.Receiver power supply distributor (UBEC).
NOTE: Please remember to fully charge your battery for the aircraft and your transmitter for the best performance.
If your batteries are running low, your aircraft might not have enough power to fly properly.
POWER SUPPLY FOR THE RECEIVER
RECEIVER
ER61-2.4GHz
CH
RECEIVER
ER61-2.4GHz
CH