Specifications

Installation instruction
1. Put the two pieces of wings into fuselage with glue.
2. Make sure the main wing is kept horizontal until the glue gets dry.
3. Install the controlling aileron servo on the fuselage.
4. Connect the control stick with the aileron.
5. Tail wing: screw the screws on the tail to fix the elevator and horizontal stabilizers.
PA 1.7 X 16 (2pcs)
PA 1.7 X 23 (2pcs)
6. Tail wing: screw the screws on the tail to fix the elevator and vertical stabilizers.
PA 1.7 X 10 (4pcs)
7. Make sure the arms of servos are at the same direction.
8. Glue the head cover with the front of the fuselage.
9. Cut off the excessive part of the tail and glue the scale tail part to the back of the
fuselage.
10. Cut off the missile rack, and glue them on the both wing tip of the main wing.
Flight adjustment
SU-27 will fly better with full-charged batteries.
Keep flight horizontal:
When you find it is difficult to fly SU-27 horizontally, please adjust the micro-adjuster on
the transmitter. For example, when you find SU-27 always fly upward, please push the
micro-adjuster on the transmitter toward the top, as this will adjust the position of the
elevator.
Mode 2
Functions for control set
Mode 1