Specifications

6. Never leave this system unattended around children with battery in the unit, as injury
can be caused due to children’s turning on the transmitter or the plane.
7. Turn the speed controller all the way down (clockwise) before the plane start to fly;
otherwise the fans will work at full power.
8. During the preparation for the flight, please remember to turn on the transmitter before
connect the battery pack.
9. The consumers over the age of 14, should have an experienced adult guide. Not
recommend for the children under the age of 14.
10. Never leave this system unattended with batteries in the unit, and around children,
as injury can be resulted due to children turning on the transmitter or the plane.
Statement
1. This is not a toy. It is for experienced modelers only. You are responsible for
the safe operation of this model and any damage or harm it may cause;
2. Please adjust this plane according to instruction and make sure finger and
other parts out of rotating parts of plane, or it may cause damage to the plane or
injury.
3. Users should follow all instructions properly and assemble the model correctly.
It is your responsibility to insure the battery is charged correctly, following these
instructions.
Charge Mode and Warning
Specifications:
Input voltage: DC 10V-15V
Output voltage: DC 7.4V & 11.1V (to 2 or 3 cell Li-po battery)
Charging current: 0.3A-1.0A (can be continuously adjusted)
12V DC Power Supplier
Indicator state:
Green: Charge complete & no battery
Red: Charging
Flash: Drip current charging
Dimension: 72x49x22mm / 2.8x2x0.9inch