Installation & Assembly
Installation
(Drywall Ceiling) Follow your purchased anchor assembly instructions.
1 Position your ladder(s) carefully to allow you to hold the medallion safely
in place with the assistance of a partner.
2 In the marks that you made in the ceiling where you are going to secure
your medallion, set your threaded drywall anchors (not included).
3 Once all anchors are in place, with the assistance of a partner,
lift the medallion into place and feed electrical wiring through center
hole of medallion.
4 Align the anchors previously attached to your ceiling with the screw holes
made in the medallion during preparation.
5 Using a minimum 2” screw, affix and secure the medallion to the installed
anchors using each mounting space located along the border
of the medallion
[C].
6 Reconnect fixture or ceiling fan (Please comply with fixture or ceiling fan
manufacturer installation instructions) and slide fixture canopy cover up to
medallion and tighten ring snug against medallion [D].
NOTE: You may need to purchase a longer thread pipe or down rod to anchor
fixture or fan, as supplied pipe or rod may not accommodate medallion
thickness. (Available at local hardware store)
7 Place provided decorative caps over the installed fastener for finished look.
Ceiling Medallions
Installation Instructions
ACCE NTS
www.afdhome.com
11423 Satellite Blvd. Orlando, FL 32837
T: 407.857.6000 / 800.747.1893 F: 407.857.9953
Fixture canopy
Warranty
AFD warrants all its products to be free from manufacturing defects for a period of three [3] years from date of purchase. This warranty does not
include damage or other problems resulting from improper installation, misuse or normal wear and tear
. AFD’
s liability is limited to product
replacement cost. It does not include freight or handling expenses, installation cost or any other costs or expenses incurred in connection with
the purchase or use of our products. The medallion you are purchasing is for decorative purposes only. It is not designed to hold any additional
weight.
AFD ceiling medallions function as a decorative element only, and are not designed to support electrical fixtures or provide any load bearing capacity.
AFD shall not be responsible if any failure to comply with these installation instructions results in the products failing to perform the purpose intended.
©2010 AFD. All rights reserved.
PRECAUTIONS - When Installing Ceiling Medallions With A Light Fixture Or Ceiling Fan
1 AL
WAYS
turn power off at breaker box prior to installation.
2 DO NOT use the medallion to support the weight of the lighting or ceiling fan fixture.
3
DO NOT use the fixture or fan canopy to support the medallion in any way.
4
AL
W
AYS
follow light fixture and/or ceiling fan manufacturer’
s installation instructions for proper fixture support.
5 ALWAYS consult with a licensed electrician or refer to local electrical codes to assure that the fixture installation meets code
requirements.
Always Follow These Safety Suggestions
1 Follow good construction practices.
2 When using power tools, adhesives and finishing materials [such as paint or stain], be sure to follow manufactur-
er’s instructions.
3 Always wear safety goggles when using a power tool or hammer.
4
Always use the right tool and/or equipment for the job.
C
D