Installation & Assembly

Glass Sink Installation
Contact: 302-791-0447 or visit website at www.arsumo.com Copyright Arsumo USA
In order to maintain your faucet’s original nish simply rinse with warm clean water and blot dry with a clean
soft cloth only. Avoid using corrosive detergents, polishers, scrapers or any other abrasive materials. In case a
buildup of dirt, clean it right away. rinse thoroughly and immediately with water to assure no detergent
remains on the surface and dry with a soft cloth.
At Arsumo your satisfaction with quality and durability of our products is exremely important to us. Therefore,
please follow the care and manienance instructions in order to prolong the lifespan of your faucet.
Vessel Sink Care and Maintenance
Arsumo glass vessel sinks are hand crafted from the highest quality tempered glass, and are extremely durable and resistant to
corrosion. However, despite the durability and strength of our sinks, they may still be damaged if proper measures are not taken
in their care and maintenance.
In order to prolong the life of your glass sink, simple daily maintenance is the key to keep your sink in its original condition. We
suggest cleaning your sink after each use with a soapy sponge, then rinsing thoroughly with warm water. You may dry it with a
towel or a dry cloth. This will eliminate water spots and streaks while the sink is in use.
Do not be alarmed if you begin to notice stains on your glass sink. They are most often caused by various minerals contained in
your water supply. These mineral deposits settle in the surface of the glass and may cause the surface to stain. In order to
eliminate stain spots, use a non-abrasive or mild-abrasive cleaner. Remember not to apply force while cleaning your glass sink.
Do not scrub the glass, as you may scratch the surface fo the sink. When nished, rinse thoroughly while warm water and dry
with a towel or a soft cloth.
At Arsumo your satisfaction with quality and durability of our products is extremely important to us. Therefore, we hope that
you try to avoid prolonged sink contact with products containing high concentrations, dish washing detergents, or beaches
containing chlorine. These products may stain the surface of the sink. Rinse thoroughly if these products do come in contact
with the sink surface and dry it with a towel or a soft cloth.
STEP1 Make sure the vessel sink is not scratched, chipped or broken prior to installation.
STEP2 Check to see if your set contains the following parts:
- Vessel sink
- Pop up drain (optional, may be sold separatedly)
- Mounting Ring (optional, may be sold separatedly)
STEP3 Locate and place the mounting ring over the drain hole with the rubber side facing down and the white washer side
facing up.
STEP4 Gently set your sink on top of the mounting ring.
STEP5 Locate and disassemble your pop up drain in the following order:
- unscrew the tail piece
- unscrew the brass nut
- remove the rm washer
- remove the concave washer, leaving the top thin rubber washer on.
STEP6 Form above the counter top, insert the drain body into the 1 3/4” drain opening of your sink.
STEP7 Form underneath the counter top, insert the concave white rubber washer onto the drain. Pushing the washer all the
way up until it is in contact with the counter top.
STEP8 Insert the rm washer onto the drain body until it comes into contact with the concave white rubber washer.
STEP9 Screw the brass nut onto the drain body until it touches the rm washer.
Please Note: Installation should all the done by hand. No tools are necessary or required.
Faucet Care and Maintenance