User Manual

manual

Atomization button

Standby long press 1.5S to set

the Bluetooth switch;

Short press on standby to enter

the atomization working mode;

Short press the power on to

switch the light mode;

Press and hold for 1.5S to turn

off the power and enter the

standby state

Timing button

Short press after

power on to set the

timer

Bluetooth

indicator

Steady light

means bluetooth

is on; off

means bluetooth

is off

2H timing indicator

4H timing indicator

2H, 4H timing

indicators are all

on for timing 6H

PAGE 1
manual 2H timing indicator 4H timing indicator Bluetooth indicator Steady light means bluetooth is on; off means bluetooth is off Atomization button Standby long press 1.5S to set the Bluetooth switch; Short press on standby to enter the atomization working mode; Short press the power on to switch the light mode; Press and hold for 1.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.