User`s manual

Page 4 · 4200-DR Series LaserSource User’s Manual
Accessories
Arroyo Instruments also sells several accessories designed to work with the
4200-DR. These include:
 1220B LaserSource Cable, 4A, 2m
This cable has DB-9 male/female connectors for interfacing to the
LaserMount or other connectorized fixtures, and shielded twisted pair
conductors for improved modulation performance. A pigtailed version
of this cable, with tinned ends for soldering into custom solutions, is
available as p/n 1221B.
 2U Rack Mount Kit, 2 Bay (p/n 1400-RM)
For installing your 4200 Series LaserSource or 5200 Series
TECSource into a standard 19” rack. The rack mount kit has space for
two instruments, but if you plan to only install a single instrument, also
order a 1 Bay Blank (p/n 1400-BL) to fill the unused opening.
 1201 USB Cable
Safety Terms and Symbols
The following safety-related terms are used in this manual:
 Warnings (noted by the WARNING heading) explain dangers that
could result in physical injury or death;
 Cautions (noted by the CAUTION heading) explain conditions that
could result in damage to the instrument, other equipment, or your
device.
 Notes (noted by the NOTES heading) are not safety-related, and are
intended simply to point out important information.
If, at any time, any of the following conditions exist, or are suspected of existing,
discontinue use of the unit until it can be inspected by qualified service
personnel:
 Visible damage to the unit, including damage or stress caused during
product shipment;
 Storage of the unit outside the standard storage temperature or
humidity rating, or prolonged storage under harsh conditions;
 Failure to operate properly.
If needed, contact your distributor or Arroyo Instruments for service or repair to
ensure the safety of the product is maintained.