User`s manual

Page 14 · 4200 Series LaserSource User’s Manual
Menu Description Factory
Default
On Delay The delay, from the time the Output button is
pressed to when the output is actually
energized.
3000ms
Comm Menu Communications Menu
Baud This sets the baud rate for the RS232 serial
port. See the Computer Interfacing Manual
which is included on the CD that
accompanied this product.
9600
Err While
Rmt
To turn off the display of errors while in
remote mode, set this value to “No”. To
display errors while in remote mode, set this
value to “Yes”.
Yes
Terminal
Mode
Terminal mode simply echoes any
characters received over the serial or USB
interfaces.
No
Msg Term This controls the output message
termination, and can be set to CR/LF, CR,
LF, or None.
CR/LF
Sys Menu System Settings Menu
Brightness The vacuum florescent display can be set to
one of eight brightness levels.
100%
Audible
Beep
This setting controls when the unit produces
audible feedback. Set to No to prevent
sound, or Yes or audible alerts such an error
messages.
Yes
Lockout
Knob
Lockout knob allows you to disable knob
operation from the main display. This
prevents accidental changes of the set point.
The knob will always work in the menus
regardless of this setting.
No