Instructions
F
Manual - SZD-54
16 www.modster.at
Introduction
Arrows Hobby is adhering to the R&D concept of following no set form, which, after the
success of trainers, warbirds, jets, once again challenges gliders. Its first glider, 2000mm SZD-
54, has been tested and summarized by excellent domestic and foreign R&D engineers and
senior testers in six rounds, and has been launched in the best posture.
To achieve the most dihedral, the SZD-54 was designed with a specialized two-piece CNC
threaded metal spar joiner- allowing the aircraft to maintain its wing geometry during de-
manding flight routines. Besides, the pre-embedded carbon fiber spars in fuselage
and main wings ensure overall rigidity in high-G maneuvers.
A high-quality 30A ESC paired with a 3136-KV1000 motor provides ample power with a 3S pack
(1300mAh-2200mAh) to perform most aerobatic maneuvers. Positive and negative loops, stall
turns, point rolls and inverted flight can be easily and excellently
performed.
The wing and horizontal stabilizers are designed with a snap-fit structure, which can be instal-
led by pressing and detached by pulling. No screws or glue necessary! The most thoughtgul
structure greatly facilitates transportation and storage. Under the premise of the degree of
factory completion being up to 85%, the aircraft can be built in as little as 3 minutes!
Don’t settle for any less than the best- Arrows Hobby 2000mm SZD-54!
Features:
• Powerful 3136-KV1000 motor with high-quality 30A ESC, 90g digital servos
• Snap together assembly, no screws or glue necessary
• Two-piece wing, two-piece CNC threaded metal spar joiner
• Folded propeller
• Functional flaps
• Belly landing wheel
• 85% factory assembled
• Recommended 3S 1300mAh-2600mAh Lipo pack provides 10-15 minutes flight time
• Made of highly durable EPO
Specifications
Wingspan 2000mm (78.7 in)
Overall length 1096mm (43.1 in)
Flying weight ~ 1130g
Motor size 3136-KV1000
Wing load 45g/dm
Wing area 25.1 dm
ESC 30A
Servo 9g Servo x 6
Recommended battery 3S 1300mAh-2200mAh