User manual Edge 540 PNP (1300mm) Arrows Hobby

Table Of Contents

Model assembly

Linkage rod installation

2. Install the pushrod to the control horn on the

vertical stabilizer as shown.

1. Install the pushrod to the control horn on the

horizontal stabilizer as shown.

1.With the airframe inversed, install the landing gear

and holder components into the slots on the fuselage

as shown.

2. Secure the landing gear onto the fuselage with the

included screws.

Landing gear installation

Horizontal stabilizer installation

3. Secure the horizontal tail in place using the

included screws.

1. Slide the horizontal stabilizer spar into the pass through

at the rear of the aircraft.

2. Install the 2 piece (left and right) horizontal stabilizer as

shown.Ensure the control horn faces down.

HKM3.0*16mm