User manual Edge 540 PNP (1300mm) Arrows Hobby

Model assembly
04
Main wing installation
3.Fit the wing halves into the fuselage cutouts.
4.Secure the wing set using included screws as shown.
1.Slide the wing spar into the pass through of fuselage
as shown.
2.Connect the wing halves onto the wing spar.
Vertical stabilizer installation
1.Install the vertical stabilizer to fuselage with glue.
Rear landing gear set installation
1.Carefully Install the rear landing gear set to the
vertical stabilizer with the included screws as
shown.
KA2.0x8mm
HKM3.0*26mm