Security Datasheet

Report No.: AR20200408CE01
Page 3 of 6 Pages
SECTION 5 –FIRE FIGHTING MEASURES
Danger characteristic:
Exposure to excessive heat can cause venting of the liquid electrolyte. Battery may burst and release hazardous
decomposition products when exposed to a fire situation.
Hazardous combustion products:
Corrosive gas may be emitted during fire.
Fire-Fighting method& media
The stuff must equip with filter mask (full mask) or isolated breathing apparatus. The stuff must wear the clothes
which can defense the fire in the upwind direction. Remove the container to the open space as soon as
possible .Spray water on the containers in the fireplace to keep them cool until finish extinguishment Media: plenty
of water, dry chemical powder or carbon dioxide .
SECTION 6 –ACCIDENTAL RELEASE MEASURES
Emergency treatment:
If the battery material is released, remove personnel from area until fumes dissipate. Provide maximum ventilation to
clear out hazardous gases. The preferred response is to leave the area and allow the batteries to cool and vapors to
dissipate. Provide maximum ventilation. Avoid skin and eye contact or inhalation of vapors. Remove spilled liquid with
absorbent and incinerate waste.
SECTION 7 –HANDLING AND STORAGE
Handling:
1. Do not allow battery terminates to contact each other, or contact with other metals.
2. Do not put the cell or battery into a fire or heat it. Do not solder the cell directly. Do not use or leave the cell or
battery in a place near fire or heaters.
3. Do not expose the battery to excessive physical shock or vibration.
4. Do not immerse, throw, and wet a battery in water.
5. Short-circuiting should be avoided. Short circuit will reduces the life of the battery and can lead to ignition of
surrounding materials. Physical contact with to short- circuited battery can cause skin burn.
6. The batteries should not be opened, destroyed or incinerate, since they may leak or rupture and release to the
environment the ingredients that they contain in the hermetically sealed container.
7. Place the cell beyond the child packing and container.
8. Do not connect the battery directly to an electric outlet or cigarette socket in a car.
9. Be sure to use the specified charger for battery, and follow the charging instructions correctly.
10. Do not mix old and new batteries together, neither with Ni-Cd, dry batteries or another manufacturer batteries or
product.
Storage:
1. Batteries should be separated from other materials and stored in a noncombustible, well ventilated, sprinkler-
protected structure with sufficient clearance between walls and battery stacks.
2. Keep the sample in the cool, dry and well-ventilated place(temperature:-20~30degree C humidity:45~85%). Do
not exposure to direct sunlight for long periods. Keep away from fire and heating sources. Don t keep the samples
with oxidizer and acid.
3. Charge the battery every 6 months to the amount specified by the manufacture, even if the battery is not used.
4. Equip with relevant types and quantities of the extinguishment instruments. The storage place should be equipped
with suitable shelter materials for divulgence handling.