Programming instructions

ManualsBrandsArrowhead ManualsComputer equipmentSK1L

SECTION 1:SECTION 1:

SECTION 1:

SYSTEM O SYSTEM O

SYSTEM O

VERVER

VER

VIEW & AVIEW & A

VIEW & A

AILABLE OPTIONSAILABLE OPTIONS

AILABLE OPTIONS

1.11.1

1.1

GENERAL DESCRIPTIONGENERAL DESCRIPTION

GENERAL DESCRIPTION

The SC system is ready to use from the factory. It is shipped from

the factory with a default (factory) program. The factory program-

ming for model SC 800 consists of one (1) fire zone and seven (7)

burglary zones. For model SC1600 the factory programming

consists of two (2) fire zones and fourteen (14) burglary zones. The

zone configuration can be individually reprogrammed from the SK1L

keypad or by using the ScanPro Downloader Software to suit

whatever zone options are necessary. Programming

cannotcannot

cannot be

performed with the

EKP1EKP1

EKP1 LED Keypad. User 16 may be additionally

programmed for keyswitch operation. There are four (4) individual

timers for E/E delay zones. Programmed loop response is available

from 10 milliseconds to 500 milliseconds.

The built in digital communicator can be programmed for today’s

most popular reporting formats.

See programming worksheet for Factory Default details.

1.21.2

1.2

ZONE PROGRAMMING OPTIONSZONE PROGRAMMING OPTIONS

ZONE PROGRAMMING OPTIONS

ZONEZONE

ZONE

ZONEZONE

ZONE

SUB FUNCTIONSUB FUNCTION

SUB FUNCTION

TYPETYPE

TYPE

FUNCTIONSFUNCTIONS

FUNCTIONS

AILABLEAILABLE

AILABLE

BURGLARY E/E 1 Bypass zone

E/E 2 Chime zone

E/E 3 Day/Night trouble

E/E 4 Loop response time

Instant Swinger rejection

Interior 1

Interior 2

Follower

FIRE Audible Loop response time Swinger

rejection Trouble

24 HOUR Silent Bypassable

Audible Loop response time Swinger

rejection Trouble

1.31.3

1.3

HARDHARD

HARD

ARE OPTIONAL ITEMSARE OPTIONAL ITEMS

ARE OPTIONAL ITEMS

EKP1 -EKP1 -

EKP1 - This is an LED keypad that can be used in the SC800

system. It is capable of showing zone status for only zones 1-8. It

is capable of many of the normal operations but

notnot

not able to function

as a keypad programmer. The operations that are

NONO

T T

T usable with

this keypad are also indicated on page (i).

SK1L - SK1L -

SK1L - This is an LCD keypad that can be used in the SC800 and

the SC1600 systems. It has

fullfull

full capabilities for operating and

programming the systems it is attached to. A variety of International

versions of this keypad are also available that have User/Installer

messages in different languages.

Four of any combinations of the keypads are the maximum per

installation.

DOB - DOB -

DOB - This is the

Data

Output

Board. It can be used as any of five

output devices. These range from Zone Alarm memory devices to

a printer interface, to a Status Output device, to a Bell Module. The

latter three are explained in detail in the programming detail for Item

30.

POB-1 -POB-1 -

POB-1 - The POB-1 kit can also be used to interface an on-site

parallel printer to the SC800/1600 alarm control panels. It consists

of a PCB and Interface cable along with mounting hardware. The

PCB must be used in the stack as specified in the instructions.

LC1 -LC1 -

LC1 - This is the Telephone Line cut module. It is designed to sense

for a drop in voltage below 3 volts for a time period of 30 seconds +/

- 15 seconds. Once activated it turns on a Form "C" relay that can

be used for a local bell, piezo or even a wireless transmitter to

transmit to a neighbor or radio communicator in case of telephone

line loss.

FM2000 - FM2000 -

FM2000 - This is a Two Wire smoke detector module. The SC system

was originally designed to accomodate four wire smoke detectors.

A maximum of ten, Two wire smoke detectors can be attached to one

of the FM2000 units. It comes with a 4.7K resistor that must be used

as the End-Of-Line resistor.

1.41.4

1.4

TIMER OPTIONSTIMER OPTIONS

TIMER OPTIONS

The SC system has various timer options that can be changed to meet your various system needs. Listed below are the programmable

range for each timer option.

Bell shutoff time 2 - 30 minutes Zone reporting delay time 10-150 seconds

Zone response time 10mSecs to 500mSecs AC and Low battery reporting delay time 1-15 minutes

Test timer A Daily weekly monthly yearly reporting Entrance delay groups 1 through 4 10-150 seconds

Test timer B Daily weekly monthly yearly reporting Exit delay groups 1 through 4 10-150 seconds

Exception windows 15 min. - 225 minutes Opening exception window start 1 min. - 24 hours

Holiday schedule 1 - 10 holidays by month/day Closing exception window start 1 min. - 24 hours

Switched Output 0 - 23.75 hours Open/Close exception schedule 1-7 days