Programming instructions

ManualsBrandsArrowhead ManualsComputer equipmentSK1L

8.368.36

8.36

ZONE RESPONSE TIME (0-99)ZONE RESPONSE TIME (0-99)

ZONE RESPONSE TIME (0-99)

The amount of time that must elapse before the system recognizes

a zone trip. The response time can be set from 10 to 500 millisec-

onds. Time = (2 + value) x 5 milliseconds.

EXAMPLE:EXAMPLE:

EXAMPLE: 5 is entered, (2+5) x 5ms = Zone response = 35

milliseconds

NONO

TE:TE:

TE:

Zone response times of less than 300mS are suscep- Zone response times of less than 300mS are suscep-

Zone response times of less than 300mS are suscep-

tibtib

tib

le to false alarms.le to false alarms.

le to false alarms.

Care m Care m

Care m

ust be taken when used.ust be taken when used.

ust be taken when used.

8.378.37

8.37

SILENT 24 HOUR PANIC ZONES (1-16)SILENT 24 HOUR PANIC ZONES (1-16)

SILENT 24 HOUR PANIC ZONES (1-16)

Select zones to be programmed for silent panic. Whether the panel

is armed or disarmed, the system or keypad will not annunciate an

alarm condition on a silent zone.

8.388.38

8.38

AUDIBLE 24 HOUR PANIC ZONES (1-16)AUDIBLE 24 HOUR PANIC ZONES (1-16)

AUDIBLE 24 HOUR PANIC ZONES (1-16)

Select zones to be programmed for audible panic. Zones selected

for audible panic are always armed unless bypassed.

8.398.39

8.39

AUDIBLE 24 HOUR FIRE ZONES (1-16)AUDIBLE 24 HOUR FIRE ZONES (1-16)

AUDIBLE 24 HOUR FIRE ZONES (1-16)

Select zones to be programmed for audible fire. Zones selected for

audible fire are always armed.

NONO

TE:TE:

TE:

IT IS STR IT IS STR

IT IS STR

ONGLONGL

ONGL

Y RECOMMENDED Y RECOMMENDED

Y RECOMMENDED

THATHA

THA

T FIRE ZONEST FIRE ZONES

T FIRE ZONES

NONO

T BE ENABLED FOR BYPT BE ENABLED FOR BYP

T BE ENABLED FOR BYP

ASS.ASS.

ASS.

8.408.40

8.40

AUDIBLE BURGLARY ZONES (1-16)AUDIBLE BURGLARY ZONES (1-16)

AUDIBLE BURGLARY ZONES (1-16)

Select zones to be programmed for audible burglary. These zones

are on when armed and not bypassed. If you wish a zone to be Silent

Burglary, program the zone in Item 40 and in Item 37.

8.418.41

8.41

ENTRANCE/EXIT ZONES (1-16)ENTRANCE/EXIT ZONES (1-16)

ENTRANCE/EXIT ZONES (1-16)

Select zones to be programmed for Entrance/Exit delay.

NONO

TE:TE:

TE:

These zones mThese zones m

These zones m

ust be prust be pr

ust be pr

ogrammed fogrammed f

ogrammed f

or audibor audib

or audib

le ble b

le b

urur

glarglar

glar

8.428.42

8.42

ZONE DELAY GROUP SELECTION (1-16)ZONE DELAY GROUP SELECTION (1-16)

ZONE DELAY GROUP SELECTION (1-16)

There are four (4) exit/entrance delay times available. These may be

used independently for partitioning, multi-premise, or separate

times for front and back doors. Select all delay burglar and associ-

ated follower zones for each delay group. A follower zone is enabled

by assigning a zone to a zone delay group,

without assigning that

zone as an entry/delay zone.

8.438.43

8.43

ENTRANCE DELAY TIMES (1-15)ENTRANCE DELAY TIMES (1-15)

ENTRANCE DELAY TIMES (1-15)

Four (4) entrance delay times are available. Each programmable

from 10 to 150 seconds in 10 second increments. Unprogrammed

value equals zero (0).

8.448.44

8.44

EXIT DELAY TIMES (1-15)EXIT DELAY TIMES (1-15)

EXIT DELAY TIMES (1-15)

Four (4) exit delay times are available. Delay times programmable

from 10 to 150 seconds in 10 second increments. Unprogrammed

value equals zero (0).

8.458.45

8.45

REPORTING DELAY ZONES (1-16)REPORTING DELAY ZONES (1-16)

REPORTING DELAY ZONES (1-16)

Select the zones which will delay before dialing out to the receiver.

If an alarm signal on a 24-Hour delay zone restores prior to

expiration of the delay time, the zone will not report out. But, audible

and silent zones will latch until the system is reset. For burglary

zones, the panel must be disarmed during the delay in order to abort

the report.

8.468.46

8.46

ZONE REPORTING DELAYZONE REPORTING DELAY

ZONE REPORTING DELAY

Time in seconds the panel will wait before seizing the telephone line.

If the zone is reset prior to the expiration of delay time, the report will

be aborted. The delay value in increments of 10 seconds.

8.478.47

8.47

TROUBLE REPORTING ZONES (1-16)TROUBLE REPORTING ZONES (1-16)

TROUBLE REPORTING ZONES (1-16)

Fire and Burglary zones selected to report a trouble condition.

Burglary zones will report trouble when violated while disarmed. Fire

zones report trouble when an open in a fire loop is detected.

Reporting Code selected in memory location 17 will be reported.

8.488.48

8.48

DAY/NIGHT ZONE (1-16)DAY/NIGHT ZONE (1-16)

DAY/NIGHT ZONE (1-16)

Burglary zones may be selected to display trouble conditions. Fire

zones are automatically enabled to display trouble. Burglary zones

indicate trouble when violated while disarmed.

8.498.49

8.49

BYPASS ZONES (1-16)BYPASS ZONES (1-16)

BYPASS ZONES (1-16)

Select those zones allowed to be bypassed. A bypassed zone is a

disabled zone when the system is armed.

NONO

TE:TE:

TE:

IT IS STR IT IS STR

IT IS STR

ONGLONGL

ONGL

Y RECOMMENDED Y RECOMMENDED

Y RECOMMENDED

THATHA

THA

T FIRE ZONEST FIRE ZONES

T FIRE ZONES

NONO

T BE ENABLED FOR BYPT BE ENABLED FOR BYP

T BE ENABLED FOR BYP

ASS.ASS.

ASS.

8.508.50

8.50

CHIME ZONES (1-16)CHIME ZONES (1-16)

CHIME ZONES (1-16)

Any combination of zones may be selected for chime. The keypad

will briefly annunciate when a chime zone is violated (zone must be

disarmed) and again when the zone restores.

NONO

TE:TE:

TE:

These zones mThese zones m

These zones m

ust be prust be pr

ust be pr

ogrammed fogrammed f

ogrammed f

or bor b

or b

urur

glarglar

glar

y opera-y opera-

y opera-

tion.tion.

tion.

8.518.51

8.51

INTERIOR ZONES (1-16)INTERIOR ZONES (1-16)

INTERIOR ZONES (1-16)

If desired, bypassable zones can be grouped together to allow

bypassing with a minimum amount of keystrokes. Item 51 allows two

different bypass groups with any zone(s) combination.

EXAMPLE 1:EXAMPLE 1:

EXAMPLE 1: Group 1 - Zones 1, 2, 3, 4

Group 2 - Zones 9, 10, 11, 12

To bypass group 1, use key sequence:

“[USER CODE] [ * ] [ 1 ] [ # ]” bypasses zones 1, 2, 3, 4 .

To bypass group 2, enter key sequence:

“[USER CODE] [ * ] [ 2 ] [ # ]" bypasses zones 9, 10, 11, 12.