Owner`s manual

All the other burglary zones except zone 3 will ARM and the display will show

ARMED. Zone 3 is now deactivated. If the window is closed and opened again,

an alarm condition will not result, as this zone will be bypassed until the system

is disarmed and rearmed. When the system is disarmed the bypass is

removed.

Zone Bypass (cont'd)

Bypassing zones with zone numbers higher than 9 require the use of the

"Two Digit" key pair prior to inputting the zone number. In the following

example zone 13 will be bypassed:

Figure 5

Group Bypass

Instead of bypassing zones individually, your installer may have assigned

several zones together to be bypassed all at one time. An example would be

turning off all the interior zones of the premises allowing movement, while still

protecting the perimeter.

The SC series control panels have 2 bypass groups which can be programmed

and used separately.

Example: Interior zones 2, 3 and 4 have been assigned as GROUP BYPASS

#1. To bypass zones 2, 3 and 4 enter the following key sequence:

Figure 6

Zones 2, 3, and 4 will BYPASS but the other zones will ARM. This is a very

easy way of arming a part of the system all at one time. The display will

show ARMED. To bypass the zones programmed to group 2 use the

following sequence: