Owner`s manual
5
RECOMMENDATION:
If, when arriving home, the burglar alarm is sounding, contact police from
a nearby location. DO NOT ENTER YOUR RESIDENCE.
Arming System with Ready Light On or Off
If the READY light is on, all zones may be armed by entering your Access Code,
using the key sequence in Figure 3. If the READY light is not on you must either
go and close the door or window that is open or BYPASS the zone and eliminate
it from the system for this ARMING. When the READY light is not on the display
will show VIOLATED and scroll through the zone descriptions of the zones that
are not ready.
Figure 3
Your system is now armed.
The armed light is on and the display shows ARMED.
Zone Bypass with Ready Light One or Off
If the ready light is off the display will show VIOLATED and the description of
the zone that is open will be scrolling through the display. Let us assume that
the zone 3 "FRONT BEDROOM" window is open. The zone 3 description
"FRONT BEDROOM" will be in the display. Entering the Access Code will not
arm the system because the zone 3 window is open. Suppose that the window
is intentionally left open to allow some air circulation and the rest of the zones
are to be armed. To bypass a zone, enter your access code, then enter the
number of the zone to be bypassed (in this case 3), enter key sequence as
follows:
Figure 4