Owner`s manual

2
General Description
The SK1L is a digital arming station that provides full system control and
displays full system status from one or more convenient locations. A
brief description of the functions of each light and the LCD display is
shown in Figure 1. Additionally, built into each SK1L is a miniature
sounding device which, when active, indicates various conditions such
as a Pre-Alarm Warning, Fault Condition, Test Modes of operation, or
Door Annunciation.
Your keypad has the added convenience of additional access codes.
These secondary codes are designed to provide access to a maid or
other service persons for whom you want to grant entry. Obviously, they
can also be used in any other way that you desire.
Arming, disarming, bypassing zones, etc., can be accomplished using
any of the codes. In order to change codes from the keypad, use of the
primary access code is required. Access codes can be changed from
the keypad and must have 4 digits.
IT IS IMPORTANT FOR YOUR SAFETY THAT YOU TEST
YOUR
SYSTEM REGULARLY.
Operating Instructions
Paragraphs that are indicated by a refer to options that may or may not apply
to your system. Those
which your installer has marked with an x should
be read as they contain information which pertains to your system.
The material in this publication is for information purposes only and is subject to
change without notice. SENTROL, INC., assumes no responsibility for any error
which may appear in this publication.