Owner`s manual

Partitioned Mode

Your installer/dealer may have assigned specific zone(s) for you. Other users

are sharing the same alarm system. There is very little interaction between

users, and arming and bypassing zones can be done without interfering with

other users. Bypassing zones is explained in the section on conventional

mode. Entering the Access Code and then pressing ENTER# will arm or

disarm all of your zones. EXAMPLE: Your Access Code is 1234, and you wish

to disarm your zones, use the normal arm/disarm key sequence as follows:

Figure 16

In case of an alarm condition, enter your Access Code plus Enter. This will shut

the alarm off.

Changing User Codes

User codes can be changed from the keypad by entering the user menu. This

menu will access several functions which may or may not be available for all

users. To enter the user menu enter the following key sequence:

Figure 17

Once in the user menu you can scroll down through the options by using the

key which is under the door.

Select the option you wish to change and press the key.

To exit the user menu press the

key. It may be necessary to enter this

key more than once to return to the original operating mode.