Owner`s manual

AC OFF: Indicates the A.C. power to your alarm

system has been disrupted.

LOW BATTERY: Indicates a low battery condition

FAIL COMMUNICATE: Indicates failure to communicate to the

central monitoring station.

IT IS IMPORTANT FOR YOUR SAFETY THAT YOU HAVE YOUR

INSTALLER CORRECT ANY FAULTS AS SOON AS POSSIBLE.

Duress (Ambush)

Duress is used during a hold-up when youre ordered to disarm your system.

When used, a silent alarm is transmitted to the central monitoring station. Press

the [0] after your Access Code, then press the ENTER#. The system will disarm

and a silent alarm will be transmitted.

NOTE: This function will only operate during a disarm command.

Normal Disarm Figure 13

Duress Disarm Figure 14