Installation Guide

21
Step 8
BS21
● Parts Needed For ●
Side Siding/Foam Tape
●●
●●
● 8431 Side Siding (4)
STEP
Installing the siding to the roof is
best done with a step ladder.
1 After the 3rd side siding is fas-
tened to the 2nd, roll it over on the roof
and fasten as before.
2 Apply gray foam tape along lower
bottom edge of the 4th side siding by
removing protective paper and press-
ing on edge of leg. Cut tape to proper
length.
3 Fasten 4th side siding to the 3rd
but do not fasten top edge at this time.
4 Apply foil tape to seam between
siding, pressing into contour of sid-
ing from floor frame to top of roof.
NOTE
Measure the building diagonally
again and make adjustments to
make sure the building is square.
This will make the siding fit better,
and holes will align.
4th Side Siding
STEP
1
2
Do not fasten top
edge at this time
Roll Side Siding over onto Roof
8431
Foam
Tape
Protective
Paper
Apply Gray Foam Tape
Foam Tape
STEP
3
Foil Tape
End
View
8431
8431
8431
STEP
4
Gray
Foam
Tape