Installation Guide

18
Step 5
BS18
● Parts Needed For ●
Headers/Frames/Jambs
●●
●●
● 9791 Front Header (1)
●●
●●
● 8437 Side Eave Frame (2)
●●
●●
● 8062 Rear Header (1)
●●
●●
● 9789 Left Door Jamb (1)
●●
●●
● 9790 Right Door Jamb (1)
STEP
1 Fasten side eave frames behind
top of corner post with a bolt and nut,
and over siding stud using a screw,
top leg facing inside building. Note:
For left end door location, fasten
side eave frames as shown.
For right end door location fasten
side eave frames on opposite side
of building.
2 Fasten front header behind top of
corner posts/gussets using one bolt
and nut on each end.
3 Fasten rear header across top of
corner posts using one bolt and nut
on each end. Note that side eave
frames overlaps front & rear headers.
4 Attach right & left door jambs to
the front header using bolts and nuts,
and to the corner posts and front floor
frame using screws.
STEP
1
Right Door Jamb
Front Header
9790
3
9791
8062
STEP
4
STEP
2
Rear Header
8437
Notched Edge
9789
Front
Front
Side Eave Frame
8437