Installation Guide

16
Step 3
BR16
● Parts Needed For ●
Corner Posts/Rear Siding
●●
●●
● 9793 Corner Post (2)
●●
●●
● 8075 Rear Siding (1)
STEP
1 Fasten two corner posts to the
rear corners of the floor frame assem-
bly using four screws.
2 Position one rear siding, starting
at rear frame, between corner posts
and fasten with six screws. Always
use washers under the heads of
fasteners where they are shown!
Each siding panel has a bottom edge
and a flat edge. The bottom edge
always overlaps the flat edge. Keep
the flat edge up. Do not fasten flat
edge now.
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this point
if you do not have enough time to com-
plete the assembly today. A partially
assembled building can be severely
damaged by light winds.
STEP
1
Remove &
Replace
Rear Floor Frame
8075
2
9793
9793
FRONT
CORRECT
INCORRECT