Installation Guide

 Parts Needed For 
Roll-Up-Door
Step 26
BX41
 7817 Spring Support Bracket (2)
 10455 Track Strut (2)
STEP
1
STEP
3
1Install spring support brackets to
the roof beams using bolts shown.
2Attach the right and left horizontal
track to the right and left vertical track
using bolts and nuts shown, following
Wayne Dalton Instructions.
3Fasten track struts to open hole
on truss assembly using 1/4-20x1/2"
(13 mm) hex head bolt and square
nut. Fasten opposite end to spring
support bracket and horizontal track
using 1/4-20x1/2" (13 mm) hex head
bolt and square nut.
Roof Beam
7817
#10-32 Square Nut
1/4-20 Square Nut
Horizontal Track
1/4-20 x 1 1/2" (38 mm)
Hex Head Bolt
10-32x7/16" (11 mm) Bolt
#10-32x7/16" (11 mm)
Bolt and Nut
Horizontal Track
7817
1/4-20 x 1/2" (13 mm)
Hex Head Bolt
1/4-20 x 1/2" (13 mm)
Hex Head Bolt
and Square Nut
10455
1/4-20 Square Nut
41