Installation Guide

 Parts Needed For 
Door Installation
Step 24
BX39
Door Assembly (1)
 7972 Door Handle Lock Bracket (1)
1Position door slides onto the legs,
from the end of door track, as shown
in the end view.
2From inside the building, put the
bottom of the door behind door jamb
into the lower door track.
3Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
4Fasten the door to the door slides
using two #10Bx1/2" (13 mm) screws
per door slide.
NOTE
The holes in the door slides allow
you to adjust the door. Place the
door in the middle holes.
5Position door handle lock bracket
aligned with handle holes, against
door jamb. Using a pencil mark
through holes onto jamb, remove
bracket and drill (2) 1/4" (6 mm)
diameter holes in jamb. Fasten
bracket to door jamb using 2 bolts
and nuts.
3
STEP
2
STEP
5
STEP
4
STEP
Door Slide
1
STEP
7972
Jamb
Door
Door
Track
END VIEW
OF TRACK
Door Slide
Lower Door Track
#10Bx1/2" (13 mm)
Screw
Horizontal Door Brace
39