Installation Guide

 Parts Needed For 
Roof Trim
Step 22
BX37
 7023 Left Roof trim (2)
 7024 Right Roof Trim (2)
 9510 Side Roof Trim (6)
 9513 Side Roof Trim (2 14x31: 4,2 m x 9,4 m)
1Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2Position left and right roof trim
to the ends of roof, noting that trim
slips under ridge cap, but fi ts on top
of side roof trim.
3Fasten roof panel rib, trim, peak
cap and ridge cap together using
bolts and nuts. Fasten the remaining
peak cap in the same manner.
4Using your thumb and index fi nger,
overbend the bottom fl ange of the side
roof trim at the corner inward enough
so the right and left roof trim caps fi t
onto right and left corners.
5Fasten trim to side trim using a
screw and washer into roof panel.
6Fasten the roof trim caps to the side
trim using a screw.
7024
4
STEP
3
STEP
2
STEP
5
STEP
6
STEP
7023
Peak Cap
Roof
Trim
Cap
9510
9510
9510
1
STEP
Arrow Logo
Goes on Front
of Building
9510
9513
9510
9510
14x31
(4,2 m x 9,4 m)
37
14x21
(4,2 m x 6,5 m)