Installation Guide

 Parts Needed For 
Roof Panels/Ridge Caps
Step 21
BX36
 9509 Ridge Cap (1)
 9512 Ridge Cap (1 1431: 4,2 m x 9,4 m)
 9491 Roof Panel (4 14x21: 4,2 m x 6,5 m)
(12 14x31: 4,2 m x 9,4 m)
2
1Install 2 more roof panels.
2Install the third ridge cap
overlapping the second ridge cap
as before. Temporarily remove the
rear corner roof panels, and install the
remaining 2 roof panels. Fasten 7th
top overlap and cover with weather
strip over head of bolt.
3Install the corner roof panels.
Fasten ridge cap using bolts and nuts.
4Fasten the lower end of the panels
to the side eave channels using
screws and washers.
9509
9512
14x31 (4,2 m x 9,4 m)
1On the 14x31 (4,2 m x 9,4 m) install
2 more roof panels.
2Install the third ridge cap overlapping
the second ridge cap as before.
Install 6 more roof panels, while
fastening 8th and 9th top overlap and
cover with weather strip over head
of bolt. Fasten ridge cap using bolts
and nuts.
3Install 2 roof panels, and the fourth
ridge cap. Temporarily remove the
rear corner roof panels, and install the
remaining 2 roof panels. Fasten 11th
top overlap and cover with weather
strip over head of bolt.
4Install the corner roof panels.
Fasten ridge cap using bolts and nuts.
5Fasten the lower end of the panels
to the side eave channels using
screws and washers.
STEP
3
STEP
9491
Cut
Weather Stripping
and Fold Under
4
STEP
5
STEP
1
STEP
36