Installation Guide

 Parts Needed For 
Left/Right Roof Panels
Step 17
STEP
2
BX32
 9492 Right Roof Panel (2)
 9493 Left Roof Panel (2)
Installing the roof panels is best done
with an 8' (2,3 m) step ladder. Each
screw and bolt in the roof requires a
washer.
1Position right and left roof panels
at the front corners and fasten to the
gable and roof beams using screws
and bolts as shown. Do not fasten
the lower end of the panels to the
side eave channel at this time.
Hint: Follow the fastener sequence
shown, for proper alignment.
2Install the right and left roof panels
for the rear corners in the position
shown.
STEP
1
9493
8 thru 11
9492
12 thru 15
16 thru 19
9492
9493
FRONT
1
2
3
4
5
6
7
Nut
Washer
Bolt
Gable
LEFT ROOF PANEL RIGHT ROOF PANEL
SCREWS TO ROOF BEAM SCREWS TO ROOF BEAM
FASTEN
TO GABLE
SLOTTED HOLES
AT TOP
SMALL HOLES
AT BOTTOM
FASTEN AT
OVERLAP
FASTEN
TO GABLE
32