Installation Guide

ManualsBrandsArrow ManualsMetal Storage Sheds(Common: 14-ft x 31-ft; Interior Dimensions: 13.67-ft x 30.875-ft) Vinyl-coated Steel Storage Shed

Step 13

BX28

 Parts Needed For 

Gable/Roof Beams

 Right Gable Assembly (1)

 Roof Beam Assembly (2)

STEP

2

1Lift and fasten a right gable

assembly at top of lintel using bolts

and nuts.

2Spread the 2 halves of a roof beam

assembly and fasten the roof beam

to the outer gable bracket using 2

bolts and nuts.

Hint: The holes along the length of

the beam must be on the top surface

and 4 hole cluster must be fastened

toward truss.

3Fasten the outer end of the roof

beam to the outer truss bracket of the

truss using 2 bolts and nuts.

Repeat Steps 2 through 3 for the

next roof beam assembly.

4 holes toward truss

STEP

3

STEP

1

2"

(5,1 cm)

28