Installation Guide

Step 12
BX27
 Parts Needed For 
Wall Channel/Door Jamb
 9477 Door Jamb (2)
 9466 Wall Channel (2)
Top View
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both
door jambs.
1Place wall channels behind wall
panel, large hole towards door
opening. Loosen wall panel and
fasten wall channels to side wall
channels using 1 screw, under
panel. Replace panel and fasten wall
channels to panel using 3 screws.
2Overlap the rib of wall panel with a
door jamb and fasten at top to side
eave channel and bottom to side fl oor
frame using #6Ax7/8" (22 mm) screws
and spacers. Positon spacer inside
wall panel rib and channel or frame.
3Fasten door jamb at middle holes
using #8-32x7/8" (22 mm) bolts,
spacers and hex nuts. Spacer is
positioned between wall panel rib
and wall channel.
4Fasten outer fl ange of door jamb
to wall panel using 4 screws.
STEP
4
STEP
1
7/8" (22 mm)
Bolt
STEP
3
Spacer
9466
9466
STEP
2
Top View
Spacer
7/8" (22 mm)
Screw
Door Track
9477
Wall Channel
FRONT
27