Installation Guide

1 Position Truss Assembly on
building by sliding column gussets
over center columns and fasten with
8 bolts and nuts on each gusset.
2 Position right and left side eave
channels over eave brackets and
fasten with a bolt and nut. Front
and rear frames overlap side eave
channels. Fasten overlaps with 3
bolts and nuts. Fasten corner panels
to channels using 4 screws.
NOTE
On the 14x31 (4,2 m x 9,4 m),
fasten the side eave channels
over eave brackets using bolts
and nuts.
Step 10
BX25
 Parts Needed For 
Truss/Top Frames
 Truss Assembly (1 14x21: 4,2 m x 6,5 m)
(2 14x31: 4,2 m x 9,4 m)
 9484 Right Side Eave Channel (2)
 9485 Left Side Eave Channel (2)
 9463 Side Eave Channel (2 14x31: 4,2 m x 9,4 m)
STEP
2
STEP
1
9485
14x21
(4,2 m x 6,5 m)
9484 Installed in Step 8
9485
9484
9463
9463
14x31
(4,2 m x 9,4 m)
25