Installation Guide

1 Position right side eave channel
against support columns. Fasten
channel to corner panel. Fasten
columns to side eave channel using
2 bolts and nuts on each column.
2 Position lower door track inside
the side fl oor frame. Overlap with
ramp and fasten from the bottom
using (3) #10-32x1/4" (6 mm) slotted
head bolts and square nuts.
3 Position track inside right side
eave channel, directly over lower door
track and ramp, and fasten using 4
screws where shown.
Step 8
BX23
 Parts Needed For 
Side Door Frames
 9484 Right Side Eave Channel (1)
 7562 Track (1)
 9467 Ramp (1)
 9464 Lower Door Track (1)
STEP
2
STEP
3
STEP
1
1/2" (1,3 cm)
Between Ramp & Panel
Notch Toward
Outside of
Building
7562
Opening
Facing In
Long Leg
on Top
Short Leg
on Bottom
9484
9467
9464
23