Installation Guide

The mid frame pieces give rigidity to
the sides and rear wall.
NOTE
Before installing side wall
channels decide at which location
you want the side entrance door.
Do not install the 1x4 (2,5 cm x
10,2 cm) side wall channels at 1
of the 4 corner locations.
1 Fasten side wall channels to
center columns using 2 bolts and to
corner panels using 4 screws.
2 Overlap with the right and left
front wall channels and fasten to
front wall panel using 3 screws. Do
not fasten hole nearest door opening.
3 Overlap with right and left rear
wall channels and fasten to column
and wall panel.
4 Fasten overlaps using 4 bolts and
nuts in each corner assembly.
Step 7
BX22
 Parts Needed For 
Mid Frames
 9482 Right Front Wall Channel (2)
 9483 Left Front Wall Channel (2)
 9476 Side Wall Channel (6)
 6942 Right Rear Wall Channel (2)
 6943 Left Rear Wall Channel (2)
STEP
2
STEP
5
STEP
1
9465
5 Install support column to side
fl oor frame and side door channel
fastening channel to center column.
Install 2nd support column to
side fl oor frame and corner door
channel. Fasten channel to corner
panel and left rear wall channel.
6943
9468
6942
9469
9476
9476
9476
9482
9483
FRONT
STEP
3
STEP
4
NOTE
On the 14x31 (4,2 m x 9,4 m),
attach the side wall channel
between the center columns
using bolts and nuts.
9461
 9465 Support Column (2)
 9469 Side Door Channel (2)
 9468 Corner Door Channel (2)
 9461 Side Wall Channel
(4 14x31: 4,2 m x 9,4 m)
9461
FRONT
22
Position with small holes
toward outside of building