Installation Guide

1 Fasten side fl oor frames together
with a column gusset using 2 bolts
from the bottom and nuts on top. At
rear of building, repeat procedure.
2 Position center column assemblies
where fl oor frames are joined and
fasten to gusset with 8 bolts.
Repeat procedure on sides of building
for the 14x31 (4,2 m x 9,4 m).
NOTE
Support center columns with
stakes or other means until wall
panels are attached.
3 Measure the fl oor frame diagonally.
When the diagonal measurements
are equal, the fl oor frame is square.
Step 5
BX20
 Parts Needed For 
Gusset/Center Column
STEP
2
NOTE
Do not fasten the fl oor frames
to your foundation at this time.
You will anchor the building
after it is erected.
The fl oor frame must be square
and level or holes will not align.
 6947 Column Gusset (3 14x21: 4,2 m x 6,5 m)
(5 14x31: 4,2 m x 9,4 m)
 Center Column Assembly (3 14x21: 4,2 m x 6,5 m)
 Center Column Assembly (5 14x31: 4,2 m x 9,4 m)
6947STEP
3
9490
9490
6947
6947
6947
6947
9490
9490
9490
FRONT
STEP
1
9490
9490
9490
6947
6947
6947
FRONT
20
14x21
(4,2 m x 6,5 m)
14x31
(4,2 m x 9,4 m)