Installation Guide

The gables go on top of the front and
rear walls to support the roof beams.
The center columns support the truss
and the framework.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1 Attach the inner and outer gable
brackets to the gables using bolts,
washers and nuts where shown.
NOTE
Mounting leg of bracket must face
toward outside of building.
Step 2
BX17
 Parts Needed For 
Gables/Column Assemblies
 9494 Right Gable (2)
 9495 Left Gable (2)
 6955 Inner Gable Bracket (4)
 9496 Outer Gable Bracket (4)
 9490 Center Column (6 14x21: 4,2 m x 6,5 m)
(10 14x31: 4,2 m x 9,4 m)
9490
2Align the holes on the center
columns back to back and fasten
together using 6 bolts and nuts.
Make 3 assemblies for the 14x21
(4,2 m x 6,5 m).
Make 5 assemblies for the 14x31
(4,2 m x 9,4 m).
3Set these pieces aside for later
assembly.
STEP
2
STEP
1
STEP
3
9490
6955
9496
Washer
9494
9495
Attach Narrow Flange
of Gable Brackets
to Gable
6955
9496
FRONT
Washer
17