Installation Guide

1 Assemble 1/2 truss at a time.
Attach column gusset to lower
chord securely using #1/4-20x1/2"
(13 mm) hex head bolts and square
nuts. All other connections are to be
made loosely.
2 Fasten lower chord to upper
chord and eave bracket to upper
chord.
3 Fasten vertical brace to lower
chord.
4 Fasten right shear plate and left
shear plate to vertical brace and
upper chord.
5 Fasten inner diagonal brace to
upper chord and lower chord.
6 Fasten 2 inner truss brackets to
upper chord and lower chord and
inner diagonal brace as shown.
Step 1
BX16
 Parts Needed For 
Truss Assembly
 6947 Column Gusset (2)
 6964 Lower Chord (2)
 6963 Upper Chord (2)
 7022 Eave Bracket (4)
 6962 Vertical Brace (2)
 7004 Right Shear Plate (2)
 7003 Left Shear Plate (2)
7003
6958
6963
90
7022
6959
6964
6962
Mounting Flange of Brackets
Must Face Towards Center
Of Truss Assembly
IMPORTANT:
Square Up
Half Truss
7 Fasten outer diagonal brace to
upper chord and lower chord.
8 Fasten 2 outer truss brackets
to upper chord, lower chord and
outer diagonal brace.
9 Fasten 2 outer truss brackets to
upper and lower chords.
10 Square up 1/2 truss, adjust and
tighten all fasteners.
11Assemble the other half of truss.
12Splice both halves together with
the splice plate and join with (4) #10-
32x7/16" (11 mm) bolts and square
nuts through vertical brace.
o
7004
6967
6965
6966
9497
6947
7022
Leave Hole On
This Side Open
For Track Strut
FRONT
 6965 Inner Diagonal Brace (2)
 6958 Inner Truss Bracket (4)
 6966 Outer Diagonal Brace (2)
 6959 Outer Truss Bracket (4)
 9497 Outer Truss Bracket (4)
 6967 Splice Plate (1)
16
Make 1 assembly for the 14x21
(4,2 m x 6,5 m).
Make 2 assemblies for the 14x31
(4,2 m x 9,4 m).