Installation Guide

ManualsBrandsArrow ManualsMetal Storage Sheds(Common: 12-ft x 10-ft; Interior Dimensions: 11.76-ft x 9.31-ft) Murryhill Vinyl-coated Steel Storage Shed

 Parts Needed For 

Ridge Caps 12x10 (3,6 m x 2,8 m)

Step 23

BW34

 7828 Middle Roof Panel (2)

 7843 Ridge Cap (1)

 7827 Left Roof Panel (1)

 6874 Ridge Cap (1)

1

STEP

1Temporarily remove right rear roof

panel.

2Install 2 middle roof panels. Fas-

ten 2nd roof panel rib overlaps with

a bolt and nut. Press 2 strips over

the bolt heads. Continue weather

stripping.

3Install the right and left roof panels

at the rear gables. Follow fastener

sequence.

4Position a ridge cap 7843 on the

completed front roof section.

5Install the second ridge cap 6874

overlapping the ﬁ rst ridge cap. Align

the holes and fasten using bolts.

6Fasten the lower end of the panels

to the side top angle using screws.

4

STEP

2

STEP

3

STEP

5

STEP

6

STEP

#8Ax5/16" (8 mm) Screw

#10-32x7/16"

(11 mm) Bolt

#10-32 Square Nut

6874

Do not fasten

this end

Weather Stripping

7843

7828

7828

7828

7827

Do not fasten

this end

34