Installation Guide

1 Install a corner wall panel at the
corner of the fl oor frame as shown.
The widest part of each corner panel
must be placed along the side of the
building for all 4 corners. Fasten the
corner panel to the fl oor frame with
4 screws.
Support the corner panel with a step
ladder until a wall panel is attached.
2 Attach the front wall panels to
the front corner panels, as shown.
3 Attach the main wall panels to
the rear corner panels, as shown.
NOTE
Be careful to install the correct
panel in each position as shown.
4 Double-check the part numbers of
the wall panels, before proceeding.
Each screw and bolt in the wall re-
quires a washer.
Step 6
BW18
 Parts Needed For 
Corners All Sizes
 7824 Corner Wall Panel (4)
 7825 Front Wall Panel (2)
 7822 Main Wall Panel (2)
7824
#10-32 Square Nut
#10-32x7/16" (11 mm)
Bolt
7822
The fl oor frame must be square
and level or holes will not align.
Washer
7822
Washer
#8Ax5/16" (8 mm) Screw
7824
7825
7824
7824
STEP
4
STEP
2
STEP
3
7825
7825
7822
7822
SIDE
SIDE
REAR
FRONT
7824
7824
7824
7824
Narrow
Side
STEP
1
Wide Side
TOP VIEW
7825
CORRECT
INCORRECT
18