Operating Guide

26
The gables go on top of the front and
rear walls to support the roof beams.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1 Lift and fasten a right and left
gable, under angle at corner, to the
door track with screws.
Hint: On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2 Join the left and right gables
together with a gable brace using a
bolt in the second hole from the bot-
tom only .
Repeat Steps 1 & 2 for the rear of
building.
3 Fasten the track supports to the
front gable assembly, as shown.
Step 13
SW26
● Parts Needed For ●
Gables/Braces
●●
●●
● Left Gable Assemblies (2)
●●
●●
● Right Gable Assemblies (2)
●●
●●
● 9009 Gable Brace (2)
●●
●●
● 6228 Track Supports (2)
1
STEP
2
STEP
3
STEP
9009 Gable Brace
6228 Track Supports
Gable