Operating instructions

3.4 Auto Locator (CB-148)
NOTE: The CB-148 Auto Locator is an option. It should be installed as
detailed in §2.3 and § 2.4. Numbers in brackets [ ] refer to Figure 3-4.
The function buttons [11] have 2-level illumination: dim (normal) and bright
(when selected). The 10-Key Pad [4] and the related buttons [5]–[10] do not
illuminate.
[1] TAPE TIME (Tape Time Readout/Reset Button)
The Tape Time readout displays the elapsed time of the tape relative to the
same zero point shown on the MTR-90III Tape Time Counter display (§3.1,
[1]) or any other point on the tape such as the beginning of a take. The Tape
Time readout is also provided with a minus sign at the head of digital
readouts when the elapsed time diminishes from 0.00.00, that is, just before
0.00.00, -0.00.00 is displayed. The same applies to LOCATE TIME [2].
❑ Resetting the Tape Time Readout: Press the RESET button adjacent to
the Tape Time readout to reset the Tape Time readout.
❑ Offsetting the Tape Time Readout: To offset the Tape Time readout
from the MTR-90III Tape Time Counter display, select a Locate Time and
press the Shift Left button [5].
❑ Correlating the Tape Time Readout: To correlate the Tape Time with the
MTR-90III Tape Time Counter display, press the LOAD [6] or SEARCH
ZERO button [15].
RESET
HMS
RESET
MS
STORE
SEARCH
ALL
CLEAR
STOP
START/LAP
ZERO SET
SEARCH
ZERO
SHUTTLE
AUTO
REWIND
SEARCH
RECORD PLAY STOP REW F.FWD
LOAD
RCLSTO
0
1
4
7
2
5
8
3
6
9
0123456789
CB-148
1 2 3
4
5
6
7
8
9
10
1213141516
11
17
18
AUTO LOCATOR
RESET
HMS
TAPE TIME LOCATE TIME
STOP WATCH
19
Figure 3-4
Auto Locator Front Panel Features
Section 3 Controls and Indicators
3 - 10
October 1990
MTR-90III Operation and Maintenance Manual